The traditional instrument box is aluminum alloy box, which is beautiful, light and has certain protection function. However, in recent years, injection box has gradually replaced the aluminum alloy box and become the main body of the mass production of instrument box. The main reason for this trend is that the protective performance of the aluminum alloy box can not meet the protection requirements for some valuable instruments, resulting in the emergence of a new protection box, which soon replaced its main position.
Aluminum alloy technology has been mature for a long time in China, and has been widely used in all walks of life. Aluminum alloy is also widely used in suitcases, trolley cases and instrument packaging boxes. Even some instrument manufacturers use aluminum alloy boxes as boxes to install instrument panels. Compared with some high-quality steel, the properties of aluminum alloy are better, which is the main factor that people choose it as instrument box. Of course, there is also a very important reason: high appearance and beautiful appearance.
However, the aluminum alloy box as an instrument box also has many problems: 1, the box mechanism is not strong enough, it is easy to fall apart after a few bumps. 2. It is not resistant to high temperature and easy to deform. 3. Not waterproof, a little rain can penetrate into the box; etc. These problems can be said to be very fatal to the box as a packaging instrument. Any problem may bring irreparable damage to the instrument.
The appearance of injection box is a new field for instrument packaging industry. 1. Because the injection box is integrated by injection molding, the shell structure of the box is stable, the surface is firm, and there is no damage when it falls from the floor with a height of more than 10 meters (after ten rounds of test), and the box has strong compression resistance (vehicle pressure test weighing 5 tons). 2. The protection grade of the box is IP67, and the waterproof and dustproof performance is excellent. For some harsh environmental conditions such as sand, rainstorm and water immersion, there is no need to worry about the damage to the instruments in the box caused by these factors. 3. There is a card slot bracket in the box, so it is very simple to install the instrument panel. 4. The box is resistant to high temperature and is not easy to deform in high temperature weather or environment. 5. The handle link is made of stainless steel chain, which is firm. If the instrument is very heavy, there is no need to worry about the handle falling off. 6. The box is black with thick lines, which is more suitable for instruments and meters. It has a deep feeling. It is more beautiful than the aluminum alloy box.
This is why the injection box will replace the aluminum alloy box as the main body of the instrument box: the protective performance and temperament are more in line with the instrument packaging.
KAXIKE safety protection case are made of improved engineering plastics, which have good weather resistance and can work in the range of - 40 ℃ ~ 95 ℃. The case can resist ultraviolet radiation, strong impact, abrasion resistance, anti-aging and flame retardancy. Waterproof and dustproof grade IP67, impervious to dust, dust-free entry, protective immersion, standard pressure time no water entry, perfect protection for instrument and equipment.